dynagrout filler

FILLERS AND PIGMENTS
CHOPPED FIBERS Chopped fiberglass fibers to give added strength to resin. Available in Quarts, Gallons and Bags.

AER-O-SIL/CAB-O-SIL/FUMED SILICA A fumed silica easily and efficiently thickens epoxy and polyester resins to provide a non-sag viscosity. Available in Quarts, Gallons, 5 Gallons and 10 and 20 Pound Bags.

MICRO-BALLOONS/BUBBLES They are hollow phenolic spheres used as a lightweight filler. Easy to sand and smooth when complete. Available in Quarts, Gallons, 5 Gallons, and Boxes.

1/32" MILLED FIBERS Milled fibers are ground fiberglass in a powder form and when mixed into an epoxy resin gives good strength and non-sag properties. Available in Quarts, Gallons 5 Gallon Pails and 50 Pound Bags.
P77 HIGH HEAT RESISTANT FILLER/FAIRING COMPOUND P-77 polyester filler and fairing compound offers the user a smooth workable paste with a set-fast cure to expedite those applications for repair or finish. P-77 is easier to sand than conventional fillers and can be finished to a feather edge. This material has excellent adhesive and bond strength to fiberglass, SMC, FRP, epoxy, graphite, and Kevlar® composites as well as aluminum, wood, and other substrates. P-77 can be easily applied with a squeegee, spatula, or flat tool, and once cured will accept virtually all types of coatings and decorative films. Features: Two component vinyl ester, sandable thixotropic paste 4-6 Minute Work Life Sand in 15 minutes White Ideal for use in filling and fairing marine FRP surfaces above or below the water line. Offers heat resistance to 446°F and will accept coatings of virtually any type without blush or discoloration. Applications: Ideal for use in filling and fairing FRP composite surfaces. Available in Quarts and Gallons with Creme Hardener. P78 HIGH HEAT RESISTANT FILLER/FAIRING COMPOUND P-78 high-heat polyester filler and fairing compound offers the user a smooth workable paste with a 40 to 50 minute work life for larger fairing and repair jobs. This material can be applied with a squeegee, spatula, or flat tool, and once cured can be filed or sanded to a feather-edge. P-78 can withstand temperatures up to 446°F to eliminate the “print-through” that is associated with conventional polyester fillers. P-78 has excellent adhesive and bond strength to fiberglass, SMC, FRP, epoxy, graphite, and Kevlar® composites as well as aluminum, wood, and other substrates. Once cured this material accepts virtually all types of coatings and decorative films with no “bleed out”. Features: Two component vinyl ester, sandable thixotropic paste 40-50 Minute Work Life Sand in 2 - 4 hours. White All the same great handling and physical characteristics of our P-77 High Heat Resistant Filler/Fairing Compound but with a longer work life and a much lower density, making it the material of choice in many marine and aircraft applications. Its long work life and high heat resistance make it ideal for a wide variety of applications. Applications: Ideal for use in filling and fairing large FRP composite surfaces. Available in Quarts and Gallons with Creme Hardener.
PIGMENTS To color to epoxy or polyester resins prior to final finish. Red, Green, White, Black, Blue, Yellow, Brown, Grey, Sky Blue. Available in 4 ounce containers.